Siig PCI 4S Uživatelský manuál stáhnout pdf

CyberPro PCI 4S

Quick Installation Guide

04-0343B

Introducing the CyberPro PCI 4S

The CyberPro PCI 4S high-speed serial I/O card provides

four additional 9-pin serial ports. Depending on the

model purchased, this board will fit into either a Full or

Low Profile chassis.

Features and Benefits

• Conforms to PCI v2.2 Plug and Play

• Full support for Windows-based software

• Reduces CPU load and improves system

performance dramatically

• IRQ sharing feature reduces IRQ conflicts

• High-speed serial port (9-pin) works with 56K V.90

external modems, ISDN terminal adapters, PDAs,

digital cameras, label printers and other serial port

devices

• Built-in FIFO buffers dramatically increase data

transmit/receive speed, especially under Windows'

multitasking environment

• Each serial port can be configured for either 5V or

12V output, for serial devices that require power

System Requirements

• Pentium or equivalent computer with an available

PCI slot

• Windows 95/98/98SE/ME/NT 4.0/2000/XP/

Server 2003

1 2 3 4 5 6 7 8 9 10

Shrnutí obsahu

Strany 1 - Quick Installation Guide

1CyberPro PCI 4SQuick Installation Guide04-0343BIntroducing the CyberPro PCI 4SThe CyberPro PCI 4S high-speed serial I/O card providesfour additional

Strany 2 - Package Contents

CyberPro PCI 4S is a trademark of SIIG, Inc.SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows areregistered trademarks

Strany 3 - Hardware Installation

2Package Contents• CyberPro PCI 4S board• 4-port fan-out cable• Low profile bracket (Dual Profile board only)• Driver CD• Quick installation guideLayo

Strany 4 - Driver Installation

3Fan-out Cable44-pinconnectorSerial ports DB9(9-pin)Figure 2. Fan-out cableHardware InstallationGeneral instructions for installing the card are prov

Strany 5 - Windows ME

45. Change JP1-JP4 jumper settings to the desiredvoltage only if your serial device(s) needs additionalpower from the serial port. However, most ser

Strany 6 - Windows NT 4.0

5Windows 98/98SE1. At the Add New Hardware Wizard, click Next.2. Select Search for the best driver for your device(Recommend), then click Next.3. Inse

Strany 7 - Installation

6Windows NT 4.01. From the desktop click Start, then Run.2. Insert the driver CD, type inD:\NT4\Install_serial.exe, then click OK. (ChangeD: to match

Strany 8 - Changing COM Port Address

7Windows XP1. At the Found New Hardware Wizard, select Installfrom a list or specific location (Advanced), thenclick Next.2. Insert the driver CD, che

Strany 9

82. Click on the + (plus sign) in front of Ports (COM &LPT), and CyberSerial PCI 16Cxxx... should bedisplayed four times.3. Double click Multifunc

Strany 10 - About SIIG, Inc

9Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers!Simply visit our website at www.siig.com and click on Support.Our online