Siig SATA II-150 Uživatelský manuál

1SATA II-150 PCI RAIDQuick Installation GuideIntroducing the SATA II-150 PCI RAIDThe SATA II-150 PCI RAID is an ultra high-speed twochannel Serial ATA

102. At the Found New Hardware Wizard:XP (w/SP1 or earlier)/Server 2003: continue to step #3XP (w/SP2 or later)/Server 2003 (w/ SP1 or later):select

11For An Existing Installation1. Setup the RAID array prior to driver installation andboot up to Windows.2. At the Found New Hardware window, click Lo

124. Click Install this driver software anyway, then clickClose.5. Restart Windows to complete the installation.When Windows resumes, go to Initio SAT

13Initio SATA RAID Manager GUIThe Initio SATA RAID Manager GUI provides the user aneasy way to monitor your RAID set.Windows 2000/XP/Server 2003 Inst

14Blank Page

15Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers!Simply visit our website at www.siig.com and click on Support.Our onlin

SATA II-150 PCI RAID is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks ofSIIG, Inc. Microsoft, Windows and Windows Vista

2Package Contents• SATA II-150 PCI RAID board• 2 SATA data cables and one dual-connector SATApower cable• Spare low profile bracket• Driver CD and Qu

31. Turn OFF the power to your computer and anyother connected peripheral devices.2. Unplug the power cord from the back of thecomputer, remove the co

43. Select Create, then press Enter.4. Select RAID 0, then press spacebar.5. Select chunk size from 8k, 16k, 32k, 64k , 128k or256k, then press spaceb

5JBODThis RAID array to be used on New/Blank hard drives.JBOD will destroy existing data on the hard drive.1. As the BIOS boots press Ctrl+R when prom

66. When asked, All data in selected drive will lost!Continue (Yes/No)?, select Yes, then press Enter.7. Select RAID, then select Rebuild.8. Press Ent

7Low Level FormatLow Level Format is built into the RAID BIOS to make itmore convenient to erase the entire contents of a harddisk drive, including da

84. At the Windows 2000 Setup screen, press F6 toinstall the RAID driver.5. When prompted, press S to specify the location ofthe driver.6. Insert the

9Windows XP/Server 2003For A New InstallationA new installation requires a floppy disk for the driverinstallation. To make this floppy disk, copy the