SIIG 04-0600A Uživatelský manuál

1Satellite SpeakerMounts - 1 PairQuick Installation Guide04-0600AIntroducing the Satellite SpeakerThe Satellite Speaker Mounts - 1 Pair are fully-adj

104. With the anchors in place, mount the wall platesusing the ST5.5 x 45 self tapping screws, seeFigure 8 below.Figure 8ST5.5 x 45 SelfTapping ScrewI

11Figure 9Insert AlligatorAnchor ST5.5 x 45 SelfTapping ScrewUsing the hammer totap anchor into placeInsert screw through wall plateand into the allig

12Low-Profile MountingThis is for wall and ceiling application.1. Install the low-profile portion of the speaker mountto the wall plate or 2-1/2"

13Blank Page

14Blank Page

15Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit our web site atwww.siig.com and click Support. Our onlin

About SIIG, Inc.Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/Oconnectivity products, including PCI & ISA serial and

2Package Contents• (2) Speaker mounts• (2) 1-hole adapters• (2) 2/4-hole adapters• (2) 2 ¼” ceiling mount extensions• Mounting hardware• Quick install

3InstallationPlease read the instructions prior to installation. Thisspeaker mount is designed solely for the mounting ofsmall speakers weighing less

42. Once the proper configuration is determined, securethe post to the speaker.3. Some speakers use the smaller M4 x 8 screw, whichis inserted into th

55. When the correct size is determined, place thescrew through the speaker post and attach to therear of the speaker enclosure. If the screw does no

63. Engage the key hole nut into the key hole slot.4. Put tension on the assembly by gently pulling backon the speaker mount post while tightening the

71/4"-20 x 1/2"Machine Screw4-HoleOrientation2-Hole OrientationFigure 5BackSpeakerSelf-Tapped Mounting1. Locate the optimum location for the

8Back SpeakerST5.5 x 19 SelfTapping ScrewFigure 6Mounting to the Wall or CeilingThe mounting hardware for the three different surfaceapplications is s

9ST5.5 c 45 SelfTapping ScrewFigure 73. Drill holes through the drywall and into the woodstud using a 1/8" drill bit. These holes should bedrill