SIIG PCI 2S Uživatelský manuál stáhnout pdf

CyberPro PCI 2S

Quick Installation Guide

04-0341B

Introducing the CyberPro PCI 2S

The CyberPro PCI 2S high-speed serial I/O card provides

two additional 9-pin serial ports.

Features and Benefits

• Conforms to PCI v2.2 Plug and Play

• Full support for Windows-based software

• Reduces CPU load and improves system

performance dramatically

• IRQ sharing feature reduces IRQ conflicts

• High-speed serial port (9-pin) works with 56K V.90

external modems, ISDN terminal adapters, PDAs,

digital cameras, label printers and other serial port

devices

• Built-in FIFO buffers dramatically increase data

transmit/receive speed, especially under Windows'

multitasking environment

• Each serial port can be configured for either 5V or

12V output, for serial devices that require power

System Requirements

• Pentium or equivalent computer with an available

PCI slot

• Windows 95/98/98SE/ME/NT 4.0/2000/XP/

Server 2003

1 2 3 4 5 6 7 8 9 10

Shrnutí obsahu

Strany 1 - Quick Installation Guide

1CyberPro PCI 2SQuick Installation Guide04-0341BIntroducing the CyberPro PCI 2SThe CyberPro PCI 2S high-speed serial I/O card providestwo additional 9

Strany 2 - Jumper Settings (JP1, JP2)

CyberPro PCI 2S is a trademark of SIIG, Inc.SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows areregistered trademarks

Strany 3 - Hardware Installation

2Package Contents• CyberPro PCI 2S board• Driver CD• Quick installation guideLayoutFigure 1. LayoutJumper Settings (JP1, JP2)Open = 0 volts (default)

Strany 4 - Driver Installation

3Hardware InstallationGeneral instructions for installing the card are providedbelow. Since the design of computer cases andmotherboards vary, refer

Strany 5 - Windows NT 4.0

4Driver InstallationThis section provides information on how to install theCyberPro PCI 2S drivers.Windows 951. At the Update Device Driver Wizard, cl

Strany 6 - Windows XP

5Windows ME1. At the Add New Hardware Wizard, select Specifythe location of the driver (Advanced), click Next.2. Insert the driver CD, check Specify a

Strany 7 - Installation

6To Verify Windows NT 4.0 Installation1. Click Start, Settings, Control Panel, double clickPorts device icon.2. Two new COM ports will be assigned whe

Strany 8 - Changing COM Port Address

7Windows Server 20031. At the Found New Hardware Wizard, choose Installfrom a list or specific location (Advanced), thenclick Next.2. Insert the drive

Strany 9

8Changing COM Port AddressSome serial devices need a specific COM port in order towork. If your serial device works properly, do notchange this setti

Strany 10 - About SIIG, Inc

9Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers!Simply visit our website at www.siig.com and click on Support.Our online