SIIG ID-DS0711-S1 Instalační příručka

1IntroductionThe 2-Port RS-232/422/485 Serial over IP Ethernet DeviceServer is designed to operate serial ports over 10/100Mbps Ethernet networks, tra

10Device Server UpdatedPress the Update button after you complete your changes.The Serial over IP Ethernet Device Server will save all settinginto int

11COM Port SetupIMPORTANT: Copy the VirtualCOM folder fromyour driver CD to your PC's hard drive, thenfollow the instructions below to add the vi

124. Click Install this driver anyway or ContinueAnyway, then a COM port would be assigned.5. Right click under the assigned COM port and clickAdd Ne

138. A (Unconnceted) TCP Client... will be established.Figure 14(Unconnected) TCP Client...9. Right click on the Virtualserial Port Console, clickAdd

14Figure 15Enter a terminal name, choose an icon, and press OKbutton.Figure 16

15Figure 17Select the assigned COM port at the Connect using field,see Figure 17. For example, if the virtual COM port wasassigned COM 3, then select

16If Hyper Terminal connects with the Serial over IP EthernetDevice Server successfully, the time clock at the lower leftcorner, Connected hh:mm:ss,

17Wiring ArchitecturePCEthernetswitch /hubRS-232 RS-232 (RTS / CTS)LANcableSerialDeviceRxTxGNDRTSCTSSerial toTCP/IPTxR

18FAQQ1. Why can't ETM.exe detect the Serial over IP EthernetDevice Server on the network?A1. Please check the followings: (1) The power adapteri

19Technical Support and WarrantyQUESTIONS? SIIG’ s Online Support has answers! Simply visit our web siteat www.siig.com and click Support. Our onlin

2RS-232/422/485 (Port 2)RS-232(Port 1)DC-In (power)LANReset ButtonLED Indicators(SYS, Port-2,Port-1)Package Contents• 2-Port RS-232/422/485 Serial ove

About SIIG, Inc.Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivitysolutions (including Serial ATA and Ultra ATA Controllers, Fir

3Device Server ConfigurationFollow the instructions below to configure your Serialover IP Ethernet Device Server, if needed. The default IPaddress o

44. Click the Modify MAC button and change theMAC address from the prompted Dialog Framewindow, if needed.5. Click the Web Browse button

5Type in password and click the Login button, thenmake your changes from the Web BrowserConfiguration webpage. See the section for moreinformation.Web

6• Firmware version: The Serial over IP Ethernet DeviceServer's firmware version is identified by date code.• Serial number: Product serial numbe

7• Subnet mask: Subnet mask of 255.255.255.0 is usuallyused for small networks, 255.255.0.0 for largernetworks. If your IP address is provided by an

8Figure 8• Serial I/O Port 1 (RS-232): One RS-232 serial port forconnecting RS-232 serial device• Serial I/O Port 1 (RS-422/485): One RS-422/485serial

9• Interface - Port 1- RS232 GTxD, RxD for data stream, no flow control- RS232 (RTS/CTS) GTxD, RxD for data stream,RTS/CTS for flow control• Interface