SIIG JJ-000082-S1 Instalační příručka

104-0452APCIe to ExpressCard BayQuick Installation GuideIntroducing the PCIe to ExpressCard BayThe PCIe to ExpressCard Bay is the perfect solution for

10Blank Page

11Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers!Simply visit our website at www.siig.com and click on Support.Our onlin

PCIe to ExpressCard Bay is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarksof SIIG, Inc. Microsoft and Windows are registered

2System Requirements• Desktop computer with an available internal USB2.0 port• PCI Express-enabled system with an available PCIExpress slot• An availa

35.25" Mounting Rack AssemblyImportant: Use the Mounting Rack Assembly onlywhen installing the adapter into a 5.25 inch drive bay.Figure 2: 5.25

4PCIe connectorFigure 5: PCIe cablePCIe cablePCIe cardPCIe connectorFigure 4: PCIe card

5USB Cable ConnectionExpressCard Adapter Pin-out HeaderFigure 7. USB Cable ConnectionFigure 6. ExpressCard Bay Pin-out HeaderPin 1 (+5VDC)Data-Data+

6Typical Motherboard USB Pin-out HeaderThe typical internal USB Pin-out Header found onmotherboards consists of 9 pins arranged in 2 rows; eachheader

75. Replace the slot bracket's holding screw to securethe card.6. Connect PCIe cable into PCIe card and theExpressCard Bay, shown in Figure 9.Fi

8Note: When installing the ExpressCard Bay into a5.25" drive bay, install it into the supplied 5.25"mounting rack before mounting into the

9USB-based ExpressCard DevicesUSB-based ExpressCard devices are hot-plug/hot-swapcompatible.• To insert, position the ExpressCard on the lefthand side