SIIG ID-DS0711-S1 Instalační příručka stáhnout pdf (Strana 16)

If Hyper Terminal connects with the Serial over IP Ethernet

Device Server successfully, the time clock at the lower left

corner, Connected hh:mm:ss, will start counting, see

Figure 19.

Figure 19

Hyper Terminal for COM Port

Initiate another Hyper Terminal as a COM Port Terminal.

Select COM 1 or other COM port. Set the COM port

properties to the same as those set for the serial port of the

Serial over IP Ethernet Device Server.

Data Transmission

When all the above movements are finished, type any

characters on the COM Port Terminal and check if the

typed characters are also displayed on the TCP/IP

Winsock Terminal. Alternatively, check if the characters

typed on the TCP/IP Winsock Terminal are also

displayed on the COM Port Terminal. If yes, then all

settings are correct and the converter is operating properly.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Žádné komentáře

SIIG ID-DS0711-S1 Instalační příručka Strana 16