SIIG SC-SAE311-S1 Instalační příručka stáhnout pdf (Strana 4)

RAID Arrays

RAID Arrays are setup in the eSATA II PCIe Pro RAID

BIOS.

Table of Contents

RAID 0 (Striping)............................................ page 4-5

RAID 1 (Mirror) .............................................. page 5-6

Single Drive Setup (Contiguous).................... page 7

JBOD Drive Setup (Concatenated) .............. page 7-8

Rebuilding a Failed Mirror Set .................... page 8-9

Deleting RAID Arrays ...................................... page 9

Resolving Conflicts......................................... page 10

Low Level Format........................................... page 10

Logical Drive Info ........................................... page 10

BIOS Configuration ........................................ page 10

RAID 0 (Striping)

This RAID array to be used on New/Blank hard drives.

Striping will destroy existing data on the hard drive.

Auto Configuration is recommended. For applications

that require a custom chunk size, Manual Configuration

is offered.

Auto Configuration (recommended)

The default chunk size is 64k when selecting Auto

configuration.

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. At the next screen select Create RAID Set, then

press Enter.

3. Select RAID0, then press Enter.

4. Select Auto configuration, then press Enter.

5. Input the RAID size, then press Enter.

1 2 3 4 5 6 7 8 9 ... 27 28

Žádné komentáře

SIIG SC-SAE311-S1 Instalační příručka Strana 4