SIIG SC-SAE311-S1 Instalační příručka stáhnout pdf (Strana 5)

6. When asked Are You Sure (Y/N)?, press Y to accept.

7. Press Ctrl+E to exit the BIOS.

8. When asked Are you sure to exit (Y/N)?, press Y to

exit and reboot.

9. Continue with Fdisk and Format steps as if you

were installing a conventional hard drive.

Manual Configuration

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. At the next screen select Create RAID Set, then

press Enter.

3. Select RAID0, then press Enter.

4. Select Manual configuration, then press Enter.

5. Select chunk size from 8k, 16k, 32k, 64k or 128k,

then press Enter.

6. Select the first drive, then press Enter.

7. Select the second drive, then press Enter.

8. Input the RAID size, then press Enter.

9. When asked Are You Sure (Y/N)?, press Y to accept.

10. Press Ctrl+E to exit the BIOS.

11. When asked Are you sure to exit (Y/N)?, press Y to

exit and reboot.

12. Continue with Fdisk and Format steps as if you

were installing a conventional hard drive.

RAID 1 (Mirror)

For New/Blank Hard Drives

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Žádné komentáře

SIIG SC-SAE311-S1 Instalační příručka Strana 5