SIIG UltraATA 133 PCI Instalační příručka stáhnout pdf (Strana 13)

6. Remove the Driver diskette and restart Windows to complete

driver installation.

Windows ME Driver Installation

For New Windows ME Systems

1. After the UltraATA 133 PCI RAID and attached drives are

configured, follow Microsoft procedures to install Windows

accordingly.

2. Once Windows has been installed, right-click My Computer,

then click Properties. Click Device Manager tab.

3. Double click Other Devices then PCI SCSI Bus Controller.

4. Click Driver tab, then Update Driver.

5. Insert the Driver diskette, check Specify the location of the

driver (advanced) and click Next.

6. Select Search for the better driver option, check Specify a

location, uncheck Removable Media, type in A:\WinMe, and

click Next.

7. Click Next and then Finish.

8. Remove the Driver diskette and click Yes to restart Windows

to complete driver installation.

For Existing Windows ME Systems

1. After the UltraATA 133 PCI RAID and attached drives are

configured, boot up Windows.

2. At the Add New Hardware Wizard, check Specify the

location of the driver (advanced), and click Next.

3. Insert the Driver diskette, check Specify a location, uncheck

the other boxes, type in A:\WinMe, and click Next.

4. Click Next and then Finish.

5. Remove the Driver diskette and restart Windows to complete

driver installation.

Verify Proper Installation for Windows 98/98SE/ME

1. Right-click My Computer, then click Properties. Click Device

Manager tab.

2. Double click SCSI Controllers, two entries, SIIG CN2496 PCI

Ultra ATA 133 RAID Adapter and ACARD RAID Processor

should be listed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Žádné komentáře

SIIG UltraATA 133 PCI Instalační příručka Strana 13